
Add to Cart
UBNT Gigabit wired router ER-10X 10-port carrier-grade NAT hardware acceleration
We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti.
System LED | |
---|---|
Flashing White | Bootup in Progress |
White | Ready for Use Not Connected to Ubiquiti® Network Management System (UNMS™) |
Blue | Ready for Use Connected to UNMS |
Steady Blue with Occasional Flashing | Ready for Use Unable to Connect to UNMS |
Quickly Flashing Blue | Used to Locate a Device in UNMS |
Alternating Blue/White | Firmware Upgrade in Progress |
RJ45 Speed/Link/Activity LED (Ports 1 - 8) | |
Off | No Link |
Amber | Link Established at 10/100 Mbps Flashing Indicates Activity |
Green | Link Established at 1000 Mbps Flashing Indicates Activity |
SFP Link/Activity LED (Ports 9 - 10) | |
Off | No Link |
Green | Link Established at 1 Gbps Flashing Indicates Activity |
RJ45 (Ports 1 - 8) | |
RJ45 ports support 10/100/1000 Ethernet connections.
| |
SFP (Ports 9 - 10) | |
Hot-swappable SFP ports support 1 Gbps connections. If you use a copper Ethernet module (example: UF-RJ45-1G), power off the EdgeSwitch before insertion; otherwise there may be a device reboot. | |
Reset Button | |
To reset to factory defaults:
| |
Power | |
Connect the included Power Adapter to the Power port. | |
Grounding Point | |
Ground bonding point for an optional ground wire. |
ES-10X | |
Dimensions | 207 x 31.1 x 90 mm (8.15 x 1.22 x 3.54") |
---|---|
Weight | 500 g (1.10 lb) |
Total Non-Blocking Throughput | 10 Gbps |
Switching Capacity | 20 Gbps |
Forwarding Rate | 14.88 Mpps |
Max. Power Consumption | 8W |
Power Method | 24VDC, 1A or 24V Passive PoE |
Supported Voltage Range | 9 -30VDC |
Power Supply | 24VDC, 1A Power Adapter (Included) or 24V Passive PoE |
LEDs | |
System | Status |
RJ45 Data Ports | Link/Speed/Activity |
SFP Data Ports | Link/Activity |
Networking Interfaces | (8) 10/100/1000 Mbps RJ45 Ports (2) 1 Gbps SFP Ports |
Management Interface | Ethernet In-Band |
Certifications | CE, FCC, IC |
ESD/EMP Protection | Air: ± 24 kV, Contact: ± 24 kV |
Operating Temperature | -10 to 50° C (14 to 122° F) |
Operating Humidity | 5 to 95% Noncondensing |
Shock and Vibration | ETSI300-019-1.4 Standard |
PoE (Port 8) | |
PoE Interface | 24VDC Passive PoE (Pins 4, 5+; 7, 8-) |
---|---|
Max. Passive PoE Wattage per Port | 15W |
24V Passive PoE Voltage Range | 24V |